Lenco SCD-2000 BT Bedienungsanleitung

SCD-2000 BT Boombox with slot-in CD/MP3 player, AM/FM radio and Bluetooth® User manual www.lenco.com 20121004 v1.0

10 Installing backup batteries By installing batteries in the backup memory battery compartment, the device will always be powered. The de

11 Using the device on batteries If the device is connected to the mains, first disconnect the power plug from the outlet. Open the bat

12 Replacing the battery of the remote control When the remote control stops working or stops working properly, the battery should be replace

13 3. Go to the Bluetooth® menu on the external device and click on "Lenco". The devices will now establish a connection. Depending o

14 Turning the radio on Press the Power button (13, 24) to turn the device on. If the radio is not in radio mode, press source (3,

15 Switching between mono and stereo Some channels can only be received in mono while some others might have bad stereo reception, causin

16 extension cable. Open the USB / SD cover by sliding it towards the handle (1) as can be seen in the figure below. Connect the USB storage device,

17 SD card playback Through the built-in SD card slot (9) MP3 and WMA files can be played. Enter the SD mode by pressing the source button (3, 29) u

18 Playback from a Bluetooth® device Through the built-in Bluetooth® receiver, music can be wirelessly streamed from an external Bluetooth® device t

19 Connections Connecting a device through the AUX input Every device with an AUX output or headphones output can be connected to the AU

2 Table of content What’s in the box? ... 4 Explo

20 Advanced Using the storage compartment Open the storage compartment (18) and loosen the Velcro. Place the device carefully on the holders and then

21 Troubleshooting Problem Solution The device is not turning on. Check if the plug is inserted firmly into the outlet. Replace the batteries. The de

22 Specifications Power supply AC ~ 100-240V, 50/60Hz Battery 8x UM2 Backup memory battery 2x UM4 Device operates 6 hours on batteries during normal

23 Safety instructions Explanation of symbols: This symbol indicates that there are important operating maintenance instructions in the user manual a

24  Do not use this device when condensation may occur.  Do not use this device near water or other liquids.  Do not use this device in a damp

25 Do not distribute copyrighted material Do not distribute copyrighted material without the permission of the owners. By doing this you risk violati

26 End of life This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe.

27 Service and support For information and support about the hardware: www.lenco.com Lenco helpdesk: Germany 0900-1520530 (Local charges) The Net

28 ©2012 STL Group B.V. all rights reserved, Lenco is a trademark of STL Group B.V. STL Group B.V. is not respo

3 Basic Operation during playback from an SD card ... 17 Playback from a Bluetoot

4 Dear customer, Thank you for choosing for Lenco. At Lenco, we are convinced that everyone should enjoy life as much as possible. Our produc

Exploring the device In the user manual, every feature or action always includes the number of the button or part that is used, so that you can easily

6 7. Equalizer button, press this button to browse through the different equalizers. 8. Volume buttons, these buttons can be used to control the vo

7 Rear view 19. Shoulder strap attachment points, the shoulder strap can be attached to these points. 20. USB charger with mini USB connec

8 Afstandsbediening 24. Power button, press this button to turn the device on or off. 25. Play / pause, mem+ button, use this button to pause a track

9 Getting started Where to install Never place the device in direct sunlight. Place it on a sturdy platform of which the surface should be flat and s